Retrieves various types of information about the computer's drive(s).
|DriveGet, OutputVar, Cmd [, Value]|
The name of the variable in which to store the result of Cmd.
|Cmd, Value||See list below.|
The Cmd and Value parameters are dependent upon each other and their usage is described below. If a problem is encountered OutputVar is made blank and ErrorLevel is set to 1.
List [, Type] : Sets OutputVar to be a string of letters, one character for each drive letter in the system. For example: ACDEZ. If Type is omitted, all drive types are retrieved. Otherwise, Type should be one of the following words to retrieve only a specific type of drive: CDROM, REMOVABLE, FIXED, NETWORK, RAMDISK, UNKNOWN.
Capacity (or Cap), Path: Retrieves the total capacity of Path (e.g. C:\) in megabytes. Use DriveSpaceFree to determine the free space.
Filesystem (or FS), Drive : Retrieves the type of Drive's file system, where Drive is the drive letter followed by a colon and an optional backslash, or a UNC name such \\server1\share1. OutputVar will be set to one of the following words: FAT, FAT32, NTFS, CDFS (typically indicates a CD), UDF (typically indicates a DVD). OutputVar will be made blank and ErrorLevel set to 1 if the drive does not contain formatted media.
Label, Drive: Retrieves Drive's volume label, where Drive is the drive letter followed by a colon and an optional backslash, or a UNC name such \\server1\share1. To change the label, follow this example: Drive, Label, C:, MyLabel
Serial, Drive: Retrieves Drive's volume serial number expressed as decimal integer, where Drive is the drive letter followed by a colon and an optional backslash, or a UNC name such \\server1\share1. See SetFormat for how to convert it to hexadecimal.
Type, Path: Retrieves Path's drive type, which is one of the following words: Unknown, Removable, Fixed, Network, CDROM, RAMDisk.
Status, Path: Retrieves Path's status, which is one of the following words: Unknown (might indicate unformatted/RAW), Ready, NotReady (typical for removable drives that don't contain media), Invalid (Path does not exist or is a network drive that is presently inaccessible, etc.)
StatusCD [, Drive]: Retrieves the media status of a CD or DVD drive, where Drive is the drive letter followed by a colon (if Drive is omitted, the default CD/DVD drive will be used). OutputVar is made blank if the status cannot be determined. Otherwise, it is set to one of the following strings:
|not ready||The drive is not ready to be accessed, perhaps due to being engaged in a write operation. Known limitation: "not ready" also occurs when the drive contains a DVD rather than a CD.|
|open||The drive contains no disc, or the tray is ejected.|
|playing||The drive is playing a disc.|
|paused||The previously playing audio or video is now paused.|
|seeking||The drive is seeking.|
|stopped||The drive contains a CD but is not currently accessing it.|
This command will probably not work on a network drive or non-CD/DVD drive; if it fails in such cases or for any other reason, OutputVar is made blank and ErrorLevel is set to 1.
If the tray was recently closed, there may be a delay before the command completes.
To eject or retract the tray, see the Drive command.
ErrorLevel is set to 1 of there was a problem or 0 otherwise.
Some of the commands will accept a network share name as Path, such as \\MyServer\MyShare\
; This is a working example script. FileSelectFolder, folder, , 3, Pick a drive to analyze: if folder = return DriveGet, list, list DriveGet, cap, capacity, %folder% DrivespaceFree, free, %folder% DriveGet, fs, fs, %folder% DriveGet, label, label, %folder% DriveGet, serial, serial, %folder% DriveGet, type, type, %folder% DriveGet, status, status, %folder% MsgBox All Drives: %list%`nSelected Drive: %folder%`nDrive Type: %type%`nStatus: %status%`nCapacity: %cap% M`nFree Space: %free% M`nFilesystem: %fs%`nVolume Label: %label%`nSerial Number: %serial%